Join Us . Facebook Follow Us . Twitter
 
 
Products Category
Hinge
2 LUXURY LEVER HANDLE SET
3 SOLID LEVER MORTISE
4 SOLID LEVER HANDLE
5 HOLLOW LEVER HANDLE
6 SOLID GRIPSET HANDLE
7 TUBULAR LEVER SET
8 CYLINDRICAL LOCK
9 MORTISE LOCK CASE
10 EURO MORTISE LOCK CASE
11 KEY CYLINDER
12 PULL HANDLE
13 DOOR CLOSER
15 ACCESSORIES


Hinge Applications:
A hinge is a component that attaches one edge of a door to the frame, while allowing the other edge to swing from it. It usually consists of a pair of plates, each with a set of open cylindrical rings (the knuckles) attached to them. The knuckles of the two plates are offset from each other and mesh together. A hinge pin is then placed through the two sets of knuckles and usually fixed, to combine the plates and make the hinge a single unit. One door usually has about three hinges, but it can vary.
 
Flag Hinge Applications:
A flag hinge can be taken apart with a fixed pin on one leaf. Flag hinges can also swivel a full 360 degrees around the pin. Flag hinges are manufactured as a right hand and a left hand configuration.
 
Hinge Features and Functions:
64mm hinges are used for cabinet doors and thin standard doors. The most common application being on bespoke kitchen doors and wardrobe doors.

75mm hinges are most commonly used on standard internal doors (35mm thick doors) and a pair is usually sufficient. However, for aesthetic reasons many people will put three hinges on each door.



100mm hinges are most commonly found on external doors and internal fire doors (45mm thick doors). Fire doors by regulation must have three hinges per door.

Most brass hinges for household/commercial door applications contain washers at the pivot which will be made of steel, stainless steel or phosphor bronze, depending on the application of the hinge. These washers prolong the life of the hinge and give it a greater load carrying capacity.

 
FINEloc Hinge:
 
Stainless Steel Ball Bearing Hinge
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 4" x 3" x 2mm
           5" x 3.5" x 2.5mm
ORDER NOW!!
 
Stainless Steel Hinge
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 4" x 3" x 2mm
           5" x 3.5" x 2.5mm
ORDER NOW!!
 
Brass 2 Ball Bearing Hinge Flat Head
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 76mm x 63.5mm x 2.0mm
ORDER NOW!!
 
Stainless Steel Double Action Hinge
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 3" x 1.5 x 50mm
           4" x 1.5 x 72mm
           5" x 2.0 x 72mm
ORDER NOW!!
 
Lift-Off Rising Hinge (Left or Right)
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 4" x 3" x 3mm
           4" x 3" x 2.5mm
ORDER NOW!!
 
Flag Hinge
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 102mm x 35mm x 2.0mm
           76mm x 33mm x 2.0mm
ORDER NOW!!
 
Flush Hinge
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 102mm x 72mm x 2.0mm
ORDER NOW!!
 
Counter Hinge
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 102mm x 32mm x 3mm
ORDER NOW!!
 
Parliament Hinge
-Finishing: Satin Stainless Steel,
                    Satin Nickel
-Size: 102 x 102mm
ORDER NOW!!
 
 
l Home l Products l Contact Us l
© 2011 CITYMAX ONE SDN. BHD. All rights reserved.